- photo_2024-09-22_07-27-48.jpg (140.29 KiB) Viewed 5916 times
- photo_2024-09-22_07-27-47.jpg (97.13 KiB) Viewed 5916 times
- photo_2024-09-22_07-27-46.jpg (207.47 KiB) Viewed 5916 times
- photo_2024-09-22_07-27-46 (2).jpg (81.51 KiB) Viewed 5916 times
WoodTony
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Re: WoodTony
Nose-waist-tail: 324-270-312 mm
Sidecut radius: 8 meters
Camber between bindings with early and smooth rocker in the nose
Core: aspen with ash stripes
Sintered base Isosport 7500. Really fast!
Sidewalls made of polyurethane around the entire perimeter of the snowboard.
Triaxial fiberglass (threads are located at angles of 0/-45/+45 degrees)
Topsheet - scratch resistant Isosport Carbonium
Sidecut radius: 8 meters
Camber between bindings with early and smooth rocker in the nose
Core: aspen with ash stripes
Sintered base Isosport 7500. Really fast!
Sidewalls made of polyurethane around the entire perimeter of the snowboard.
Triaxial fiberglass (threads are located at angles of 0/-45/+45 degrees)
Topsheet - scratch resistant Isosport Carbonium
- pcT0TgLBblk.jpg (972.37 KiB) Viewed 5915 times
- KKbTHxN0rEA.jpg (885.63 KiB) Viewed 5915 times
- F5YJiv4CTQU.jpg (375.48 KiB) Viewed 5915 times
- e6NM08Mn3UU.jpg (937.6 KiB) Viewed 5915 times
- DPU5IWQhgA8.jpg (638.21 KiB) Viewed 5915 times
Re: WoodTony
The biggest board I've ever made. Length 168 cm, nose width 349 mm! Waist 302 mm! Tail 330 mm! Many boards have a nose narrower than their waist 
At the same time, the sidecut radius is about 10 meters. The board was conceived by the customer as a universal equipment for the track and forest for a person with a large foot. Sintered base made in Austria, two layers of triaxial fiberglass and polyurethane sidewalls, which perfectly dampen board vibrations when riding. Topsheet - carbon honeycomb.
At the same time, the sidecut radius is about 10 meters. The board was conceived by the customer as a universal equipment for the track and forest for a person with a large foot. Sintered base made in Austria, two layers of triaxial fiberglass and polyurethane sidewalls, which perfectly dampen board vibrations when riding. Topsheet - carbon honeycomb.- IMG_0120.JPG (980.43 KiB) Viewed 5915 times
- IMG_0119.JPG (909.57 KiB) Viewed 5915 times
- IMG_0118.JPG (885.88 KiB) Viewed 5915 times
- IMG_0117.JPG (854.43 KiB) Viewed 5915 times
- IMG_0116.JPG (770.52 KiB) Viewed 5915 times
Re: WoodTony
- IMG_0123.JPG (692.03 KiB) Viewed 5915 times
- IMG_0122.JPG (647.27 KiB) Viewed 5915 times
Re: WoodTony
Love the carbon topsheet board!
The printed graphics look top notch as well! Do you print them yourself? I'm guessing you're using sublimation - if so, I would love to see the setup (printer, press) you use
The printed graphics look top notch as well! Do you print them yourself? I'm guessing you're using sublimation - if so, I would love to see the setup (printer, press) you use
Re: WoodTony
Hi, Chrismp!
Glad you like my boards:)
It's really sublimation, but my friends do it for me(Desperado Boards https://desperadoboards.com/). I don't have a printer or a sublimation press. They have a vacuum press for sublimation. But what printer and what print profile they use, I don't know, unfortunately. I can ask if I get a chance.
Glad you like my boards:)
It's really sublimation, but my friends do it for me(Desperado Boards https://desperadoboards.com/). I don't have a printer or a sublimation press. They have a vacuum press for sublimation. But what printer and what print profile they use, I don't know, unfortunately. I can ask if I get a chance.