I have several pieces of equipment that I may be getting rid of and thought I would see what the readers think is a fair price.
Grindrite ST600. It is an old maching but works good. I have a maunal and several belts along with a scotch brite belt. 220 single phase
Winterstieger Slum waxer. Is very clean and works fine. I do not have a belt. I hooked power to it and all seems to be in great working order. No manual. 220 20A
Fontaine Edger. This maching works great. Very clean. I have several belts and the manual for it.110v
Last edited by rockaukum on Fri Mar 05, 2010 4:20 pm, edited 1 time in total.
If you want them gone quick, you can always call up wintersteiger and see if they'll buy them back from you. I know they like to keep old stock around for resale and/or parts.
Also whenyou have them on the phone have them look up the serial number of the ST-600, because certain ones were set up to be able to accept an autofeed, depends on the serial number. Might be worth a couple bucks more if its got the holes and proper spacing, etc to accept an autofeeder, which wintersteiger can sometimes locate or provide you
