I have several pieces of equipment that I may be getting rid of and thought I would see what the readers think is a fair price.
Grindrite ST600. It is an old maching but works good. I have a maunal and several belts along with a scotch brite belt. 220 single phase
Winterstieger Slum waxer. Is very clean and works fine. I do not have a belt. I hooked power to it and all seems to be in great working order. No manual. 220 20A
Fontaine Edger. This maching works great. Very clean. I have several belts and the manual for it.110v
What's it worth
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
What's it worth
Last edited by rockaukum on Fri Mar 05, 2010 4:20 pm, edited 1 time in total.
-
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact:
-
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact:
If you want them gone quick, you can always call up wintersteiger and see if they'll buy them back from you. I know they like to keep old stock around for resale and/or parts.
Also whenyou have them on the phone have them look up the serial number of the ST-600, because certain ones were set up to be able to accept an autofeed, depends on the serial number. Might be worth a couple bucks more if its got the holes and proper spacing, etc to accept an autofeeder, which wintersteiger can sometimes locate or provide you
Also whenyou have them on the phone have them look up the serial number of the ST-600, because certain ones were set up to be able to accept an autofeed, depends on the serial number. Might be worth a couple bucks more if its got the holes and proper spacing, etc to accept an autofeeder, which wintersteiger can sometimes locate or provide you
Doug
-
- Posts: 117
- Joined: Sat Jan 27, 2007 8:29 pm
- Location: Denver, CO
- Contact: