What's it worth

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
rockaukum
Posts: 561
Joined: Fri Nov 03, 2006 9:23 am
Location: Placerville area

What's it worth

Post by rockaukum »

I have several pieces of equipment that I may be getting rid of and thought I would see what the readers think is a fair price.

Grindrite ST600. It is an old maching but works good. I have a maunal and several belts along with a scotch brite belt. 220 single phase
Image
Image
Winterstieger Slum waxer. Is very clean and works fine. I do not have a belt. I hooked power to it and all seems to be in great working order. No manual. 220 20A
Image
Image
Fontaine Edger. This maching works great. Very clean. I have several belts and the manual for it.110v
Image
Image
Last edited by rockaukum on Fri Mar 05, 2010 4:20 pm, edited 1 time in total.
knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

I'm thinkin the ST600 is worth about 2000-3000

I dont know much about the others.
Doug
bobbyrobie
Posts: 124
Joined: Wed Sep 17, 2008 9:17 pm

Post by bobbyrobie »

Where are you located?
rockaukum
Posts: 561
Joined: Fri Nov 03, 2006 9:23 am
Location: Placerville area

Post by rockaukum »

Placerville, CA
knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

If you want them gone quick, you can always call up wintersteiger and see if they'll buy them back from you. I know they like to keep old stock around for resale and/or parts.

Also whenyou have them on the phone have them look up the serial number of the ST-600, because certain ones were set up to be able to accept an autofeed, depends on the serial number. Might be worth a couple bucks more if its got the holes and proper spacing, etc to accept an autofeeder, which wintersteiger can sometimes locate or provide you
Doug
heliski989
Posts: 117
Joined: Sat Jan 27, 2007 8:29 pm
Location: Denver, CO
Contact:

Post by heliski989 »

What do you want for the Slum Waxer? We will take it right now if the price is right.
Post Reply