hi guys
due to some reasons i am going to make Steel Edges by my own.
could anyone share with technical details of Edges, please?
first of all i am interested in material, SAE or UNS designation of stainless steel.
and most important is drawing with exact sizes. All i could find is a US Patent wich describes construction only in general.
looking forward for any information.
Edges drawing required
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
SovietBear
- Posts: 3
- Joined: Tue Nov 03, 2009 1:50 pm
- Location: Nikolaev, Ukraine
-
twizzstyle
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
Overall width (including the teeth) - 0.300"
Width of just the edge bit (not including teeth) - 0.090"
Height of edge - 0.076"
Thickness of teeth - 0.025"
The shape/size of the teeth (as viewed from the top) has varied between edges I've gotten from SkiBuilders.com, and SnowboardMaterials.com but the cross sectional measurements are the same.
Made a rough sketch for you...
Width of just the edge bit (not including teeth) - 0.090"
Height of edge - 0.076"
Thickness of teeth - 0.025"
The shape/size of the teeth (as viewed from the top) has varied between edges I've gotten from SkiBuilders.com, and SnowboardMaterials.com but the cross sectional measurements are the same.
Made a rough sketch for you...
-
SovietBear
- Posts: 3
- Joined: Tue Nov 03, 2009 1:50 pm
- Location: Nikolaev, Ukraine