Gerber Edge FX

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
User avatar
nrgboards
Posts: 69
Joined: Wed Nov 04, 2009 5:38 pm

Gerber Edge FX

Post by nrgboards »

We have one of these at work wondering if anyone has tried using one of these for backprinting topsheets? We have a roll of 5mil and 10 mil clear plastic and i thought about printing on the back of it in reverse, just wondering if anyone knows if I would have bonding issues.
http://www.gspinc.com/default.asp?contentID=48
Top
doughboyshredder
Posts: 1354
Joined: Mon Sep 17, 2007 7:37 pm

Post by doughboyshredder »

I can't tell from that link for sure, but it looks like all of that material is vinyl. Like for vehicle wraps and what not. Definitely won't adhere to epoxy. But you may be able to press without a topsheet and then apply a printed piece of vinyl?
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”