You need a compressor with pressure range up to..say 4 bar. I seriously doubt you can find a compressor that you can't press skis with. If your bladder is completely airproof you will not need a tank on it either, the compressor will only run once to reach the wanted pressure, then stop. If it leaks it will refill when needed.
I'm having a hard time finding valves to put in my hose. Where can I get it? No problem ordering from U.S or other countries.
Or if someone can show me what kind of valve I need.
One more: The Binding inserts, are they threaded ? (is it called threaded?)
Do anyone know what I mean. Do you use glue etc when mounting a binding in the inserts? Or is it possible to mount and demount a binding as many times as you like?
On the inserts. Once they are in the skis (after production) I have mounted and remounted several skis with the same bindings wiht out any problems. On one snowboard I will be using some loc-tite as the screws come loose after a few runs.
On the valve for the hose, I use a "schrader valve". It is the valve used in a vehicles rim, in order to inflate the tires. Should be able to get them at about any auto store and should be cheap (about a dollar here).
Check ou this link: http://www.skibuilders.com/phpBB2/viewt ... ader+valve
rockaukum
Have buldt my own longboards(skate), and this cant be that much more harder.