For discussions related to ski/snowboard construction/design methods and techniques.
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
esscher
- Posts: 36
- Joined: Mon Mar 24, 2008 6:26 am
Post
by esscher »
I am curious whether the fiberglass has to be one long piece that spreads the length of the board, or can it be two pieces end to end?
If it were fine to lay them end to end, I could save a lot of money on fiberglass.
Esscher
-
nzjibber
- Posts: 9
- Joined: Mon Jan 07, 2008 11:59 pm
Post
by nzjibber »
Hi esscher.
I dont think It would affect the performance to much. I would definitely overlap the pieces by 2 or 3 cms or more though.
-
Idris
- Posts: 382
- Joined: Wed Jun 29, 2005 3:34 pm
- Location: Chamonix, France
-
Contact:
Post
by Idris »
I have two short pieces of glass on more than one ski. Normally overlapped it where the binding area was to strengthen that area.
