Its so silent
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 21
- Joined: Tue Oct 24, 2017 1:05 pm
I am a new builder that has been lurking... a lot! Still haven't pulled a ski out of the press just yet but the long road I have been traveling to finally lay a pair up is getting very short! I also got a hold of Dtrain through here to help me out finding some supplies. Posts have been slow but this is still an absolute WEALTH of knowledge and I cannot thank you guys enough for the detailed posts I find here.
Maybe all of us newbies are just spending longer and longer reading through the old posts as the available literature is ever increasing! I will certainly start a post to chronicle my journey once I have my hands on my first pair!!!
Maybe all of us newbies are just spending longer and longer reading through the old posts as the available literature is ever increasing! I will certainly start a post to chronicle my journey once I have my hands on my first pair!!!
-
- Posts: 21
- Joined: Tue Oct 24, 2017 1:05 pm
I'm still here, had no idea I was in the top 10 posters club. I'm mostly too busy to post much, work, skis, kids, coaching soccer , life in general etc....I'm still building and selling skis and have evolved my builds greatly over the past few season. I've built a cnc and I'm having success with that. I'm using solid ABS tail bumpers and clear nylon over the veneers now with some screen printing.
I still use the forum for research now and then but mainly doing my own r&d now that I have been building for an out 8-9 years. I figure I'm up over 100 pair built now.
I still use the forum for research now and then but mainly doing my own r&d now that I have been building for an out 8-9 years. I figure I'm up over 100 pair built now.
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com
- Head Monkey
- Posts: 310
- Joined: Sun Jul 17, 2005 4:53 pm
- Location: Carnation, WA
- Contact:
Personally, I just find it a lot easier to keep up with the FB group than to come here, so I keep forgetting about this forum. It's rolled in with most of the other groups I'm in these days. I see a lot of people there from here as well: https://www.facebook.com/groups/snowboardbuilders/ Not sure if there are any other groups around.mammuth wrote:... or if everybody is somewhere else in the net.
Would be wonderful to see this site get some love though: newer members, a fresher interface, maybe forum software newer than 2005

Looking at that top 10 posters list, that's a blast from the past right there! Would be fun to see post stats over time.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
I still look in every few months...
No time for building skis the past year or so.
Need to get shop cleaned up and get at it though, time for a new pair for me.
The boy just bought himself new mogul skis. K2 244's
sam
No time for building skis the past year or so.
Need to get shop cleaned up and get at it though, time for a new pair for me.
The boy just bought himself new mogul skis. K2 244's
sam
You don't even have a legit signature, nothing to reveal who you are and what you do...
Best of luck to you. (uneva)
Best of luck to you. (uneva)
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
?
Last edited by MontuckyMadman on Sat Dec 29, 2018 9:40 pm, edited 1 time in total.
sammer wrote: I'm still a tang on top guy.
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
Re: Its so silent
Yo, it is damn quiet here!!!
Spent an hour or so catching up on all the posts I've missed in a year!
Can't believe I'm still just out of the top 10... WTF!!!
Got a new pair of symmetrical park skis on the go. Should be ready to press next week.
Later,
sam
Spent an hour or so catching up on all the posts I've missed in a year!
Can't believe I'm still just out of the top 10... WTF!!!
Got a new pair of symmetrical park skis on the go. Should be ready to press next week.
Later,
sam
You don't even have a legit signature, nothing to reveal who you are and what you do...
Best of luck to you. (uneva)
Best of luck to you. (uneva)
Re: Its so silent
Too busy building to post, cranking out a pair per week for the past 3 months.... Have 3 pair left in the cue.
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com
Re: Its so silent
Same here...addicted to skibuilding...
Re: Its so silent
I'm more working on CNC stuff than actual building currently. I bought one of those cheap Chinese 6040 CNCs for learning. Currently cutting ribs on for new tip/tail blocks and enhancing the machine with limit switches, lighting for the spindle, etc.