Crisp Customs 2011/12

[MontuckyMadman]

Cassetts are flat layup. We do have acces to a sheet metal roller but not nessecary. Just aneal and press and cook a few times.

[falls]

thanks MM

[falls]

Got a bit done this weekend.


And first snow of the autumn last Thursday.

[falls]

Finished up a pair that have been needing some tidying up. The veneer split. Didn't look so bad, but added some racing stripes to disguise it a bit.
Has been 40C+ here the last 5 days, so thinking colder thoughts!
178cm
124-74-110 or something like that. Maybe 16m radius. Hard to remember these things when you designed them several years ago.

[BRAND2102]

Just wondering how did you do the multi color die cut. Do the 2 pieces have to be melted together or just taped before layup

[falls]

Just make sure the two pieces align well (ie cut square and straight) and tape them together. I have used contact paper (for covering books - CLEAR) on the underside of the base (ie outside the ski). Peel off after pressing.
You can tape the seam internally too with fibreglass tape (plastering tape) if you want to.