Seattle/Eastside area get together for local builders?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
- Head Monkey
- Posts: 310
- Joined: Sun Jul 17, 2005 4:53 pm
- Location: Carnation, WA
- Contact:
I dded up looking at my calendar. I can't make the 3rd. I could do Saturday the second, or the following weekend. Or I can just miss it this time and catch you all next time. Sorry for the confusion.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
You guys might know this. When I was in Fremont at the start of the month ( on holidays from Australia) I saw that Mervin MFG had an office there. It was after 5 on Saturday so i didn't explore and went to the brewery instead...
My question, is that offices or a factory? I was thinking about trying to get a look in the door but we left on the Monday.
My question, is that offices or a factory? I was thinking about trying to get a look in the door but we left on the Monday.
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
Would you guys rather go for the 9th or should we stick with the 3rd? Either day works for me. Can't so it on the 10th as it Mothers Day.
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
OK, lets go with the 9th then. Same time 2pm at the Roanoke in Mercer Island.
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
- Head Monkey
- Posts: 310
- Joined: Sun Jul 17, 2005 4:53 pm
- Location: Carnation, WA
- Contact:
Cool. See you all on the 9th.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
See you all this afternoon. Ill be sporting my Whistler hat so you can find me easy. Its suppose to be hot out so make sure to check out back in the outdoor area.
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA