Seattle/Eastside area get together for local builders?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
How about a Sunday afternoon so traffic is light for everyone to get there. Ill throw April 26th or May 3rd out there for starters. Roanoke Tavern on Mercer Island is a cool place and shouldn't be too busy then. Great bar if you've never been there and they have a nice outdoor area if the weather is nice. Once we get a date and a head count, Ill call ahead and see if I can get the back room reserved.
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
But the lifts are still running for the next 2 weekends. Headed to White tomorrow unless Crystal gets a better dump. Game time decision. Looking forward to meeting everyone, hopefully we can make the 1st Annual PNW Builders Convention happen, even if it is just a few of us. If anyone is heading to White or Crystal tomorrow, let me know and maybe we can hook up for a few turns.
Cheers, -D
Cheers, -D
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
OK lets make it official, 3rd of May it is! Roanoke tavern, Mercer Island, Wa. 2pm work for everyone? Ill be there a bit early to get a table and Ill wear a dark grey 'Whistler/Blackcomb hat' so you can find me. If its nice out, make sure to look outside in the back as well.
Email me at don@rymeexperimentals if you want/need my cell number or send me a PM.
Mike, can you make this? Looking forward to meeting you all.
-Don from Ryme
Roanoke address... 1825 72nd Ave SE, Mercer Island, WA 98040
Link to directions...
http://www.bing.com/local?lid=YN925x157 ... cer+island
And bring some pics of your builds or better, throw a few in the car and we can have a show and tell in the parking lot. There's usually parking available in the rear behind the tavern.
Email me at don@rymeexperimentals if you want/need my cell number or send me a PM.
Mike, can you make this? Looking forward to meeting you all.
-Don from Ryme
Roanoke address... 1825 72nd Ave SE, Mercer Island, WA 98040
Link to directions...
http://www.bing.com/local?lid=YN925x157 ... cer+island
And bring some pics of your builds or better, throw a few in the car and we can have a show and tell in the parking lot. There's usually parking available in the rear behind the tavern.
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
-
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
I'll skype in and have a beer with you fellas!!!!
hey guys, sounds very geeky but I would be keen to join in albeit from a distance. If any one of you guys are suitably equipped with an iphone or what ever I'll skype you guys and have a beer with you while you are having dinner!!!!! cheers, Rich
MonkeyCAM and SnoCAD - https://github.com/mikemag
Ski binding mounting https://github.com/splitn2/DrillSki
Richard Harcourt | www.splitn2.com | Christchurch New Zealand
rich@splitn2.com | www.facebook.com/splitn2
Ski binding mounting https://github.com/splitn2/DrillSki
Richard Harcourt | www.splitn2.com | Christchurch New Zealand
rich@splitn2.com | www.facebook.com/splitn2
-
- Posts: 85
- Joined: Fri Dec 21, 2012 8:57 pm
- Location: Fall City, Wa.
- Contact:
While we live in Microsoft land, I don't know if were that cool to make this happen via Skype or other methods right now. Ill take some pictures to post and my hope is that this movement grows over time. Maybe someday we can broadcast live but for now I'm just happy to get a few of us together to shoot the shit. Ill take notes and let everyone know how the discussion goes. Thanks for all of your support.
www.rymexp.com
On the edge of control is a good place to be!
On the edge of control is a good place to be!
- Head Monkey
- Posts: 310
- Joined: Sun Jul 17, 2005 4:53 pm
- Location: Carnation, WA
- Contact:
Yup, I can make it.
Everything I know about snowboard building, almost: MonkeyWiki, a guide to snowboard construction
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X
Free open source ski and snowboard CADCAM: MonkeyCAM, snoCAD-X