Ski building pics

MadRussian · Post by **MadRussian** » Thu Jan 31, 2013 5:35 pm

I read somewhere if tablesaw blade throwing dust upwards it because fence is misaligned.
IMHO dust mask is simply not sufficient enough for amount fine dust created in the shop. Respirator best way to go.
I think air filtration unit is a must and that window fan with filter cheap alternative to shop filtration system. The problem I run into use those filters they get clogged up very fast 12 x 12 x 1 filter could go in a day 2" thick filters better but they obviously more expensive. Best if you can find some kind reusable filtration material which can be washed and reused. Home Depot sell one of those, inexpensive compared to average filters, 12"x36" about $10

deepskis · Post by **deepskis** » Fri Feb 01, 2013 2:23 pm

Thanks guys! Lots of usefull ideas!

After todays crash in the slopes I might consider putting the bindings on the sidewalls instead OAC... Lost the binding in a full speed turn

Oahh!! The ski inded up 300 m down the slope...

deepskis · Post by **deepskis** » Sat Apr 13, 2013 11:45 am

Just had to post it...

deepskis · Post by **deepskis** » Wed May 15, 2013 1:31 pm

Just made some new skis for the wife. Very pink...

deepskis · Post by **deepskis** » Mon Jun 03, 2013 2:05 pm

Time for a new ski design. Let me introduce the "Deep RaceCarver"

Dimensions
Length 1750 mm
Top 130 mm
Waist 95 mm
Tail 125 mm
Radius 19 m

Sublimated clear Nylon and IsoSpeed base.

Fastest thing I have built so far

backyardskier · Post by **backyardskier** » Mon Jun 03, 2013 3:53 pm

that is one fat racer.

deepskis · Post by **deepskis** » Mon Jun 03, 2013 9:08 pm

backyardskier wrote:that is one fat racer.

The camera adds 10 pounds

chrismp · Post by **chrismp** » Mon Jun 03, 2013 10:32 pm

nice one! the topsheet looks great! where do you buy the nylon topsheets?

deepskis · Post by **deepskis** » Tue Jun 04, 2013 1:51 pm

Thanks Crismp! Miller is my new friend :-)

chrismp · Post by **chrismp** » Tue Jun 04, 2013 10:51 pm

yes, they're great! i bought quite a few inserts from them

OAC · Post by **OAC** » Wed Jun 05, 2013 8:06 am

Cool design!
Weight?

deepskis · Post by **deepskis** » Tue Jun 11, 2013 12:28 pm

OAC wrote:Cool design!
Weight?

Thanks Janne! About 950 grams. What is the weight of the famous Wolverine these days?

Misha · Post by **Misha** » Tue Jun 11, 2013 9:05 pm

OAC wrote:Cool design!

+100500!

OAC · Post by **OAC** » Tue Jun 11, 2013 9:46 pm

deepskis wrote:
OAC wrote:Cool design!
Weight?
Thanks Janne! About 950 grams. What is the weight of the famous Wolverine these days?

950g?

The Wolverines = 1750g

falls · Post by **falls** » Tue Jun 11, 2013 9:53 pm

yeah I was wondering that too OAC!
My 74mm waist 178cm carving ski has cores that weigh 730g each.

Ski Builders Forum

Ski Builders Forum

Ski building pics