For non-commerical sales of materials, equipment, and resources related to ski/snowboard building
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Thu Jan 10, 2013 1:52 pm
Well, REALLY SUPER bad ass for the price. 3850 takes it away! 96"l x 16.25"w x 12.5"h cavity built from 12-40 I beams, all nicely BOLTED not welded and on most excellent wheels, one side rigid, other end turning. Cat track, bladder system tested to 160psi (haha, a couple of times
) and dual heaters with dual programmable PID controllers and SSR's w/ K type thermocouples. Plus a couple of forms, 1 matched top and bottom and one for use with the track. Sweet deal, trust me...you couldn't EVEN build it for this price, plus...battle tested
.
"86% of the time it works 100% of the time".
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Fri Jan 25, 2013 1:38 pm
FINE THEN! Someone make me an offer, no reasonable offer turned away? haha, have an awesome winter!
"86% of the time it works 100% of the time".
knightsofnii
Posts: 1148 Joined: Tue Jan 08, 2008 6:02 amLocation: NJ USA
Contact:
Post
by knightsofnii Fri Jan 25, 2013 5:56 pm
post a pic of that badass mofo
Doug
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Tue Feb 05, 2013 8:38 pm
yea man...too many pictures. too many pictures wrecks the mystery, right? ahaha
"86% of the time it works 100% of the time".
sammer
Posts: 933 Joined: Wed Dec 19, 2007 10:37 pmLocation: Fernie B.C.
Contact:
Post
by sammer Tue Feb 05, 2013 9:59 pm
Not really hard to find if you know how to look!
I'm guessing it still kinda looks like this.
http://s1213.beta.photobucket.com/user/ ... rt=3&o=118
I wish I had a place to put it. It would look like shite after a season of sitting outside in the snow. I would definitely buy it!
Good luck on your next venture Brazen! I'll take you're link off my website.
We'll miss ya on here brother
sam
You don't even have a legit signature, nothing to reveal who you are and what you do...
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Tue Feb 05, 2013 10:28 pm
Awww thanks Sam. I'm still going to pop in from time to time to help where I can. BTW, the press is painted with 7-8 coats of hand rubbed Rustoleum black paint...so no rust, Just sayin'
"86% of the time it works 100% of the time".
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Sun Feb 17, 2013 7:17 am
fine then...3000.00 kill me.
Last edited by
Brazen on Wed Feb 27, 2013 11:46 am, edited 1 time in total.
"86% of the time it works 100% of the time".
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Mon Feb 18, 2013 9:24 am
Nah, at least not yet...the whole plug and play aspect goes away
Thanks though!
"86% of the time it works 100% of the time".
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Wed Mar 06, 2013 1:30 pm
Annnnnnd it's gone!
"86% of the time it works 100% of the time".
sammer
Posts: 933 Joined: Wed Dec 19, 2007 10:37 pmLocation: Fernie B.C.
Contact:
Post
by sammer Wed Mar 06, 2013 9:43 pm
Brazen wrote: Annnnnnd it's gone!
Good to hear!
What is scrap metal worth these days?
sam
You don't even have a legit signature, nothing to reveal who you are and what you do...
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Thu Mar 07, 2013 6:31 am
Yea, sad to see it go
. Went to a good home though!
"86% of the time it works 100% of the time".
) and dual heaters with dual programmable PID controllers and SSR's w/ K type thermocouples. Plus a couple of forms, 1 matched top and bottom and one for use with the track. Sweet deal, trust me...you couldn't EVEN build it for this price, plus...battle tested 
