Tip Spacer not bonding

[OnDeck]

Always mix your epoxy by weight. get a good digital scale to help you with this.

.

Second that motion. Weighing by volume (and by eye) worked great until one day when I tried using more of everything, then it didn;t. Now I use a cheap digi kitchen scale, cover it in clingfilm to avoid getting epoxied, and weigh all my epoxy/hardener to the gram.

[ggardner90]

FIXED: i talked to the guys at entropy resins which was great. turns out i was not cooking them as long as i needed to be. i doubled my cure time and now i have everything good. turns out i was doing everything else right so good call on the epoxy issue

Thanks guys