Masonite?

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
BillHobo
Posts: 7
Joined: Tue Aug 02, 2011 3:52 pm

Masonite?

Post by BillHobo »

I made my bottom mold using plywood and filled the gaps using 1/8" masonite board. however i found that this didn't conform uniformly to the mold. meaning my tip and tail radius might be too tight. ( i made the tip radius 12.5cm). am i missing something?
Top
skidesmond
Posts: 2338
Joined: Tue Apr 07, 2009 3:26 pm
Location: Western Mass, USA
Contact:
Contact skidesmond

Post by skidesmond »

Post some pics. I made my tip/tail molds using a 300mm (30cm) radius. 12.5cm is awful tight. Are you using SnoCAD-X? Using that software will show you what a 12.5cm tip radius looks like.
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”