heat blankets from Rama Corp

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
prospectsnow
Posts: 141
Joined: Sun May 02, 2010 8:21 pm
Location: Sacramento, Ca
Contact:
Contact prospectsnow

heat blankets from Rama Corp

Post by prospectsnow »

Anyone ever hear of these guys?
I talked to them and they are cheaper than MEI.
It sounds like MEI is somewhat proven.
They said their blankets are tested up to 25psi.
Any way to see if these guys have legit product?
We have snowboard and kiteboard build kits!
https://prtahoe.com/collections/build-kits
Top
doughboyshredder
Posts: 1354
Joined: Mon Sep 17, 2007 7:37 pm

Post by doughboyshredder »

25psi is not enough, unless you only plan on vacuum bagging.
Top
prospectsnow
Posts: 141
Joined: Sun May 02, 2010 8:21 pm
Location: Sacramento, Ca
Contact:
Contact prospectsnow

Post by prospectsnow »

Thats what I said.
They said they tested at 25 psi, that doesn't mean it only works up to 25 psi.
Does MEI test their blankents up higher, in the 60 to 90 psi range?
We have snowboard and kiteboard build kits!
https://prtahoe.com/collections/build-kits
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”