dynastar

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Drew
Posts: 74
Joined: Thu Feb 11, 2010 8:21 pm
Location: deep south

dynastar

Post by Drew »

I have skied 3 of dynastar's all mountina models(sultan/legend) and just cant ski them. My friend's dad has the sultan 80's from last year and they work fine on softer snow but once i get onto ice, they turn into glue. This is fine on an icy groomer but if your sking the bumps, you cant scrub speed without getting stuck. Stopping is even worse, you just chatter until you finally stop.
I've had the same problem with the xxl and the 85.

Has anyone else had problems with them?
knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

you mean too sharp? they're probably bent wrong, causing excessive contact points
Doug
Drew
Posts: 74
Joined: Thu Feb 11, 2010 8:21 pm
Location: deep south

Post by Drew »

kinda. It feels like they are 3 times sharper than freshly tunned skis. It could be the tune but I had problems with them from demo shops in vail and stowe as well.
Post Reply