core profilers

EricW · Post by **EricW** » Tue Oct 12, 2010 7:25 pm

So I've been looking at router bridge type of profilers. The only one I like so far is the one that Kingswood uses.

http://www.skibuilders.com/phpBB2/viewt ... =kingswood

It looks like 1" conduit with bolts for adjusting. Anyone have more insight this?

originskis · Post by **originskis** » Tue Oct 12, 2010 7:39 pm

mine is just like that except instead of the metal rails i used primed mdf moulding. its super cheap and works great. to give it a curve i shim it up with washers i found that are exactly 1mm, then put a screw through the middle of them and kapeesh. if i get around to it i might put some pics up.

sammer · Post by **sammer** » Tue Oct 12, 2010 8:16 pm

Yup I'd say MDF molding is the way to go.
I knew I should have patented it

http://www.skibuilders.com/phpBB2/viewtopic.php?t=1326

Doesn't take much for shims to make it solid.

sam

originskis · Post by **originskis** » Thu Oct 14, 2010 7:34 pm

haha yeah. i got the mdf idea from you (thanks a BUNCH!) but use the washers instead. they are bomber solid.

OnDeck · Post by **OnDeck** » Wed Oct 20, 2010 2:24 pm

Jsut saw this (MDF and shims). Goddamn brilliant! It's, literally, something i could run home and try tonight.

EricW · Post by **EricW** » Wed Oct 20, 2010 3:04 pm

OnDeck wrote:Goddamn brilliant!

That's what I said when I saw that. My wife didn't get it.

sammer · Post by **sammer** » Wed Oct 20, 2010 8:06 pm

Thanks, my ego needed that

Too late to patent! I've already made it public.

sam

Ski Builders Forum

Ski Builders Forum

core profilers

core profilers