Edge for 1.5mm base

[Richuk]

Does anyone know what size edges I will need for 1.5mm base? I would like to buy enough for ten pairs. Happy to share an order with others in Europe or elsewhere

[jono]

If you use the 1.33mm edges found in the skibuilders' store with 1.5mm base material you should be able to grind your finished skis down to a nice flat base with minimal edge loss. I've found that I can get some pretty deep dimples in my bases and I've often thought of using slightly thicker base material to compensate for these imperfections.

Also check http://www.skibuilders.com/phpBB2/viewtopic.php?t=2216

[Richuk]

Thanks for the push in the right direction