materials search

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
buck
Posts: 2
Joined: Mon Feb 15, 2010 4:43 pm
Location: Eagle, Co

materials search

Post by buck »

looking to buy materials from any one looking to sell. I'm planning on building everything, but if the cost was cheaper to buy used, I would. Also looking to buy the materials for about six pairs of large skiis.
User avatar
nate
Posts: 88
Joined: Mon Sep 07, 2009 5:56 pm

Post by nate »

I can sell you the materials for 1 pair of skis.
But they've already been used...
;)
knightsofnii
Posts: 1148
Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:

Post by knightsofnii »

used materials LOL.

I've always wondered if you tore a board/ski apart, if you could re-use ANYTHING? maybe the inserts if you were careful, and if you could do enough precise sanding you could re-profile the core down to something that would fit with a smaller board/ski.

but after tearing apart you'd probably damage the core.

Old boards make good "caul plates" for vacuum bagging, or could maybe be used as a top cassette for a smaller board?
Doug
buck
Posts: 2
Joined: Mon Feb 15, 2010 4:43 pm
Location: Eagle, Co

ha-ha

Post by buck »

thanks guys :oops:
I ment used firehoses,heat blankets, planer, etc...
good to know that you cant reuse the actual ski materials though ;)
Jekul
Posts: 240
Joined: Thu Nov 05, 2009 12:06 pm
Location: Arvada, CO
Contact:

Post by Jekul »

I've got a couple of heater controls. (Cal-controlls 3300). I've had to buy pretty much everything else though.
Post Reply