router bits for diecut
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 191
- Joined: Thu Mar 22, 2007 8:00 am
router bits for diecut
hello all
I would like to know if someone know what is the best router bits for cnc diecut... i have bit with one flute but some bases material get to bad cut...
something like this
http://www.izar-tool.com/general/productos.php
and need some advise
Best regards
I would like to know if someone know what is the best router bits for cnc diecut... i have bit with one flute but some bases material get to bad cut...
something like this
http://www.izar-tool.com/general/productos.php
and need some advise
Best regards
-
- Posts: 191
- Joined: Thu Mar 22, 2007 8:00 am
-
- Posts: 191
- Joined: Thu Mar 22, 2007 8:00 am
-
- Posts: 191
- Joined: Thu Mar 22, 2007 8:00 am
thank you endre for all your help... but still need one more advise... today i spend all mornign searching arround shops looking for those bits, and i had found that the 4 mm bits doesnt have Tungestinium cutter, they are just hard metal... with 2 straight fluts... this is ok HSS type??
http://www.dremeleurope.com/dremelocs-p ... rod_id=133
http://www.dremeleurope.com/dremelocs-p ... rod_id=133
-
- Posts: 191
- Joined: Thu Mar 22, 2007 8:00 am
hello endre, thanks very much for your help.
i had asked to the FREZITE guys ( one of the best and durable routerbits on europ and they have their home page in diferent languages), for straight routerbit for wood in 4mm and they send me 3mm wrong but it works like a ninja sword.
see the photos of the samples i had made:
Thanks
PS: buy your router bit from this guys and you will have the best routerbits you can get. they are a bit expensive, but good as ninja sword
i had asked to the FREZITE guys ( one of the best and durable routerbits on europ and they have their home page in diferent languages), for straight routerbit for wood in 4mm and they send me 3mm wrong but it works like a ninja sword.
see the photos of the samples i had made:
Thanks
PS: buy your router bit from this guys and you will have the best routerbits you can get. they are a bit expensive, but good as ninja sword