Controller Issues!

wakesurfermike · Post by **wakesurfermike** » Mon Sep 21, 2009 1:49 pm

Is anybody familiar with the Fuji PYZ4?

Mine is going bezerk, the PV keeps flashing all kinds of numbers, from -134 to 600 to different fault readings. Meanwhile the SV is set at 143, but roasting the blanket up to like 280.

I tried to run the auto tuning, and after a few minutes everything just gets way too hot so I unplugged the power to the blanket and left the thermal coupler in for like three hours and it still is just freaking out.

I am still able to run the press off the top controller, but is a pain to keep plugging and unplugging the two blankets to try and keep even heat.

Please help!

wakesurfermike · Post by **wakesurfermike** » Mon Sep 21, 2009 6:45 pm

Anybody? Doughboy? Kam? Odin? Knightofknnii? All you guys seem to know your $#!t, any advice at all?

bobbyrobie · Post by **bobbyrobie** » Tue Sep 22, 2009 8:06 am

check your tc

wakesurfermike · Post by **wakesurfermike** » Tue Sep 22, 2009 9:18 am

It seems to be working fine, when I plug it in the other controller it's all good.

Ski Builders Forum

Ski Builders Forum

Controller Issues!

Controller Issues!