What router bit to use

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Kuro08
Posts: 2
Joined: Mon Nov 03, 2008 2:50 am

What router bit to use

Post by Kuro08 »

Hi, i am looking for a 8mm router bit which i am going to use for core profiling. Should i use a straight bit with large diameter?I can't seem to find the bit stated under the howto guide.Thx
Top
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

8mm this is not but works well.

http://www.skibuilders.com/phpBB2/viewt ... s&start=15

page 2



This one I think
http://www.homedepot.com/webapp/wcs/sto ... 0003+90401

Image
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”