Ok Tanks i think i will give it a try
I Used snocad 2 for this because you can see how high your tips are and Not only the tips radius. But you cant just tipe in how high you want them you Need to klick alot

It would be nice to hear something about that design , even if it is complete crap...

I would not really feel comfortable with just building something

so i did another one just for the rocker and camber
notice that the ski will be 185 long but the tips aren´t in the design yet.
the ski will be 185 long as said.

http://imageshack.us/f/707/rockerohnett.jpg/

please reply

hope it works now :

i think i will go with 10mm for the core as the glas is thicker, the ski a bit wider and i am lighter.

any tips about the ammount of rocker?


I would post the design i did but somehow i still can´t even though i did two posts and i am also registered more than one day.

The core will be made of glued ash. THe ski will have a length of 185cm
I thought i might need a less thick core because i am very light weight but on the other hand the ski is not the widest so i am a little unshure

I am planning on building ski since quite a while and i am reading here for about two weeks but i still have a few questions ;) I plan to build a ski similar to a völkl bridge. 95mm base 128 tip and 115 tail. i am 1,83m (72 inces) at only 60kg (132kg) without ski clothes my questions are: how thick ...