|
|
the think pinks2658 viewsthe think pinks--1st homebuilt pair
|
|
Solid Ash Ski3338 views70-60-63 at 200cm length, fitted with a leather binding based on a traditional Norwegian design. These where built to the customers specifications.
All of the solid wood skis I build are first roughly shaped, steam bent, finished, then oiled with waterlox (a type of danish oil)
|
|
camber1017 viewscamber is 8 mm
|
|
just out of the press1145 viewsJust out of the press
|
|
pair of skis1063 viewslength: 187
tip-waist-tail: 131-92-116 mm
camber: 8 mm
radius: 21 m outside 24 m inside
|
|
Birch Skis3718 viewsMy first pair of solid wooden skis - they where made out of Birch which was a common wood traditionally for solid wood skis, as was Ash and Hickory.
They are fitted with a leather binding that is based on a traditional Norwegian design.
|
|
print1060 viewsI did not use a layer of board between the fire-hose and the ski, so the texture of the hose is printed on the ski.
|
|
Hard Maple Profile3266 viewsA pair of solid hard maple skis. These skis where sold with a classic 3 pin binding.
|
|
telemark1073 viewsThis is the second pair of skis I made. Because topsheet wasn't available, finishing is pure epoxy. The core is made of bamboo, no sidewalls. tip is 127 mm, waist 88 mm.
|
|
|
|
|
|
|
