|
Ski Building Materials
We are happy to offer ski-building materials for sale. Our inventory will
continue to expand, so check back soon if we don't have what you're looking for. We are committed to meeting your
needs and helping you with all your building endeavors.
Fiberglass, triaxial 22 oz/sq yd (744 g/m^2), 25-inch wide [Item # fib2225]
Standard Edges (steel, not sand blasted or treated), 1.33 mm step, 80" long [Item # edgestd133]
Note: these edges are not sand blasted or treated; therefore, you
will need to either sand blast them or use sand paper to abrade the surfaces
to improve bonding. |
OUT OF STOCK
80 inches long,
$2.25/each
You will need 4 edges per pair of skis, or 2 edges per
snowboard. Tips on using edges
(*.PDF file)
|
Sand Blasted and Treated
Edges (steel), 1.33 mm step, 80" long [Item # edge133]
Rubber Vibration Damping Strip (VDS), 25 mm (~1") wide [Item # VDS25]
 |
$1.50/meter
VDS rubber, 25 mm wide, 200 micrometer thick (0.008")
You will need 8 meters per pair of skis, or 4 meters per
snowboard. Therefore, 2 meters will cover one ski -- one 2 m strip
per edge.
|
4001 Grade P-tex Base Material, 30cm wide, 1.3mm thick, black [Item #
base400113nblk]. NOTE: 4001 grade is optimized for better performance
(e.g., better glide), and it's a step above the traditional 2001 grade base
material.
 |
4001 grade, 30 cm wide, black
$11.99/meterYou will need 2 meters of base material for one
pair of skis or one snowboard
|
2001 Grade P-tex Base Material, 30cm wide, 1.3mm thick, green [Item #
base200113grn].
 |
OUT OF STOCK
2001 grade, 30 cm wide, green
$9.99/meter
You will need 2 meters of base material for one
pair of skis or one snowboard. NOTE: abraded on one side, and waxed on
other.!
|
2001 Grade P-tex Base Material, 30cm wide, 1.3mm thick, vista orange [Item #
base200113vorg].
 |
OUT OF STOCK
2001 grade, 30 cm wide, vista orange
$9.99/meter
You will need 2 meters of base material for one
pair of skis or one snowboard
|
2001 Grade P-tex Base Material, 30cm wide, 1.3mm thick, chrome [Item #
base200113chr].
 |
2001 grade, 30 cm wide, chrome
$9.99/meterYou will need 2 meters of base material for one
pair of skis or one snowboard.
|
2001 Grade P-tex Base Material, 30cm wide, 1.3mm thick, light blue [Item #
base200113lblue].
 |
2001 grade, 30 cm wide, light blue
$9.99/meterYou will need 2 meters of base material for one
pair of skis or one snowboard. NOTE: abraded on both sides!
|
Topsheet, Natural (almost clear), 30cm wide, 0.750mm thick [Item # topsheetnat]
 |
30cm wide, natural
$9.99/meterYou will need 2 meters of base material for one
pair of skis or one snowboard. For an example of what the end result looks
like, click here.
|
Sidewall material (P-tex), white, 60mm x 12.7mm x 165cm (2.36"x0.5"x65") [Item # swwhite]
 |
60mm x 12.7mm x 165cm, white (2.36"x0.5"x65")
$24.99/each
One piece will provide enough material for one pair of
skis, or two snowboards. Note: you will need to use a table or band saw to cut
into long thin strips. Don't forget to properly flame treat or abrade the
surfaces for bonding.
|
Sidewall material (P-tex), black, 60mm x 12.7mm x 165cm (2.36"x0.5"x65") [Item #
swblack]
 |
60mm x 12.7mm x 165cm, white (2.36"x0.5"x65")
$24.99/each One piece will provide enough material for one pair of
skis, or two snowboards. Note: you will need to use a table or band saw to cut
into long thin strips. Don't forget to properly flame treat or abrade the
surfaces for bonding.
|
Tip/Tail Spacer Material (P-tex), white, 12" x 12" x 2mm [Item # ttspacer2mm]
 |
12"x12"x2mm, white
$4.99/eachOne piece will provide enough material for one pair of
skis, or one snowboard.
|
Tip/Tail Spacer Material (P-tex), black, 12" x 12" x 2mm [Item # ttspacer2mmblk]
 |
12"x12"x2mm, black
$4.99/eachOne piece will provide enough material for one pair of
skis, or one snowboard.
|
|
