Europe Supplies

Idris · Post by **Idris** » Mon Oct 08, 2007 5:22 pm

I thought there was a European ski/snowboard material supplier was posted somewhere here. I can't find it anymore?

Shipping from the USA either from Skibuilders.com or from PMGear (who I'm working for at the moment) would cost far too much.

I am looking for a source of edges, vds rubber, base and triax glass.....might also be after clear topsheet and UHMW sidewall.

Trying to avoid using uni + biax to make up triax this time around which is all I can find from r-g.de and swisscomposite.ch

Thanks

dbtahoe · Post by **dbtahoe** » Mon Oct 08, 2007 7:44 pm

http://www.boardbuildingsupply.eu/

I'm up over the hill in Incline Village. I was at the PM shop last year. I would like to see how a ski gets laid up. Do you ever let visitors in?

Idris · Post by **Idris** » Mon Oct 08, 2007 8:10 pm

dbtahoe wrote:http://www.boardbuildingsupply.eu/

I'm up over the hill in Incline Village. I was at the PM shop last year. I would like to see how a ski gets laid up. Do you ever let visitors in?

Thanks for the link.. Yeah if you are headed this way (reno) give me a shout. 775.771.9865

MartinJern · Post by **MartinJern** » Tue Oct 09, 2007 12:48 pm

might also be after clear topsheet and UHMW sidewall.

Me too! can't find a supplyer...
boardbuildingsypplys dont have sidwallmaterial, they have clear topsheet but only 31cm wide, I need at least 32cm

any ideas of where i can find it.

So your in the states again Idris. I hope to see u in cham this winter.

brodo · Post by **brodo** » Wed Oct 10, 2007 11:06 am

Martin have you asked at Montana in Sweden?

CH Sjölund
Montana Sweden AB
chs.montana@telia.com
Office +46-60-61 96 00
Cell +46-70-661 77 55

MartinJern · Post by **MartinJern** » Wed Oct 10, 2007 1:17 pm

Thanks brodo.
What do they sell? cant find them on the net..

dbtahoe · Post by **dbtahoe** » Wed Oct 10, 2007 1:26 pm

http://www.montana-international.com/

brodo · Post by **brodo** » Thu Oct 11, 2007 5:53 am

I don’t think they have a webpage for the Swedish division. They sell material produced by Gurit so pretty much everything except edges and rubber. It is possible to by small quanta (approximately 10meters or more) of there standard materials. Do remember though that in addition to the price you get from Montana you will have to pay shipping and customs from Switzerland.

chilly · Post by **chilly** » Fri Oct 19, 2007 7:27 am

Hello Everybody,

Thanks again for the good response!

I had now added some sidewall material to the shop, for the moment only in black, but i hope, that i will get more colors and types soon.

Abou the topsheet, yes, at there is no 32cm width topsheet in the shop, but i'm waiting for topsheet in this deminsions.

So, i wish you all a good building time, and a great ride!

best regards,
Fabian

ps.:i hope it is ok to post this here, if not, please let me know.

Ski Builders Forum

Ski Builders Forum

Europe Supplies

Europe Supplies