Ski Builders Forum

Posted: **Tue Jun 26, 2007 2:21 pm**

I have a whole bunch of stuff to sell...Send me an email if you are interested in anything MLReed05@gmail.com
Feel free to make offers!

22oz Triax. 50" wide: Sold

Camax Inserts 12mm: .35/each

Camax Inserts 10mm: .35/each

Approx 7ft length of firehose: 10$

Approx 7ft Air bladder made of firehose: 25$ (with air fitting)

Heat blanket 12x72 ,14 amp, j type termopcouple (I will have to double check specs): $250

Heat Blanket Controller (I will supply specs on components if you are interested): Sold

Porter-Cable 1-3/4 Peak HP Fixed Base Router with Case: $95

Three Approx 6ftx 6" strips of absolutly amazing Quilted Maple veneer: $20 each

Dewalt Jig Saw w/ 1/2 dozen composite blades: $75

Large Heavy duty Jorgenson Clamps: $20 each

Irwin Quick Grips: $10 each

Square w/ level: $10

3 yards of 50" 8 oz biaxial: $15

Mixing buckets & sqeezes: $10

Edges (176mm w/ bent tips ans tails): $4 each

Posted: **Tue Jun 26, 2007 2:30 pm**

Everything you see in the pictures is for sale. If I forgot to list anything just shoot me an offer.

Mike

Posted: **Tue Jun 26, 2007 6:28 pm**

I am 99% sure I will take the controller. I sent you a PM/email.

Posted: **Wed Jun 27, 2007 1:21 am**

iggyskier wrote:I am 99% sure I will take the controller. I sent you a PM/email.

I forgot to mention that I am selling this un-wired for liability reason. I will include the wires and talk the buyer through the setup if needed. It works great though. I use it on my house hold circuit with no problems.

Posted: **Wed Jun 27, 2007 2:15 am**

completely understandable. As I said, consider it sold.

Posted: **Fri Jun 29, 2007 8:01 am**

Pics are up!

Posted: **Sat Jun 30, 2007 5:20 pm**

I stopped by yesterday on my way to Maine and snagged the glass (thanks again for the deal). All of the stuff for sale looks like it's in great condition, I only wish I had more money to spend while I was there!

On a semi-related note, got my cores cut and glued up today (white ash and cherry). prifiling jig is nearly complete. Profiling and mold tommorow!

Posted: **Mon Jul 02, 2007 4:01 pm**

Maple Veneerhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1

Porter Cable Routerhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1

Dewalt Jig Sawhttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1[/b]

Bar Clampshttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1

Quick Gripshttp://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1

Posted: **Thu Jul 05, 2007 6:35 pm**

I just got my inserts (40 12mm). Thanks alot. Very reliable seller and fast shipping.

Posted: **Fri Jul 13, 2007 3:09 am**

Anything still for sale?

Posted: **Sat Jul 28, 2007 6:53 pm**

krp8128 wrote:Anything still for sale?

I still have...

edges: $3 each

Heat blanket: $200 or best offer

Press Frame 12" x 7.5': $100 (pickup only) check out my posts for picks

Posted: **Mon Jul 30, 2007 6:50 pm**

Where in Western Mass. are you and have you got a photo of the press frame?

Posted: **Sun Aug 05, 2007 2:34 am**

what are the specs on the heat blanket?

As in watts, amps, volts etc??

Thanks

Posted: **Fri Aug 10, 2007 2:05 pm**

mark wrote:Where in Western Mass. are you and have you got a photo of the press frame?

The press frame is in wilbraham, ma. If you look at my ski building journal you will see pics.

Posted: **Fri Aug 10, 2007 2:05 pm**

Tassie Boy wrote:what are the specs on the heat blanket?

As in watts, amps, volts etc??

Thanks

Sorry- its been sold

Ski Builders Forum

Excess Ski Building & Woodworking Supplies

Excess Ski Building & Woodworking Supplies

Prices Reduced-Ebay!