I have access to some old 4x12 i-beams to build a press. My question is how to use them. Would the ibeams on their side be strong enough for a top and bottom or would I need 6 upright (3 top, 3 bottom). I'm just getting involved in ski building so I want to make sure I give myself a fighting chance but don't need a production level platform.
Thanks in advance for any advice.
Doug
Lake Tahoe
I-Beam Ski Press
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 117
- Joined: Sat Jan 27, 2007 8:29 pm
- Location: Denver, CO
- Contact:
press
i had the same thing check this out
try that
try that