For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
endre
Posts: 413 Joined: Sun May 01, 2005 8:51 am
Location: norway
Contact:
Post
by endre » Thu May 03, 2007 2:15 am
let's compare sizes:
this is my new 12" Ultraman (from Mandal's reberbane)
Going to build me some big planks this summer
anyone fatter or longer? show us!
mark
Posts: 101 Joined: Sat Mar 24, 2007 5:37 am
Location: Western Mass
Post
by mark » Thu May 03, 2007 4:56 am
Yeah but how hard does it get?
I'd like to know what the working/ bursting psi on that hose is.
littleKam
Site Admin
Posts: 269 Joined: Mon Dec 13, 2004 7:43 pm
Location: SoCal
Post
by littleKam » Thu May 03, 2007 6:19 pm
you making surfboards now?
- Kam S Leang (aka Little Kam)
endre
Posts: 413 Joined: Sun May 01, 2005 8:51 am
Location: norway
Contact:
Post
by endre » Sun May 06, 2007 9:34 pm
mark wrote: Yeah but how hard does it get?
I'd like to know what the working/ bursting psi on that hose is.
burst pressure is about 25 bar, I seldom use more than 5-6 anyway.
if it is flat at 8 bar (max of most small compressors) it will give 125 tons of pressure. In short I think the frame will burst long before the hose does.