PLEASE HELP!! Converting snocad DXFs to be laser cut
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 22
- Joined: Mon Oct 23, 2006 2:37 pm
PLEASE HELP!! Converting snocad DXFs to be laser cut
hello, i have some templates needing to be made, and i have a guy who can cut them for free. however, there have been huge problems converting the Snocad drawings to the correct format for the cutting process. i am pretty much clueless in this situation. can anyone help? shit, ill throw some $ to someone to convert them correctly. i guess you cant add attachments to these post? ill post some links in a second...
-
- Posts: 22
- Joined: Mon Oct 23, 2006 2:37 pm
-
- Posts: 22
- Joined: Mon Oct 23, 2006 2:37 pm
-
- Posts: 22
- Joined: Mon Oct 23, 2006 2:37 pm
Park Ski.dxf of size 0.495 MB
http://www.filefactory.com/file/5b6a1e/
Powder Ski.dxf of size 0.515 MB
http://www.filefactory.com/file/fda29c/
http://www.filefactory.com/file/5b6a1e/
Powder Ski.dxf of size 0.515 MB
http://www.filefactory.com/file/fda29c/
I'd be glad to help but the file downlod has me baffled!! What format does the laser cutter need the files in? Usually the software that runs the cutter will read a dxf file in directly, sometimes it has to be scaled or rotated onto the available stock but it usually is not a major issue. If you want you can pmail me and I'll give you an email address that you can forward the files to.East_Coast_Style wrote:Park Ski.dxf of size 0.495 MB
http://www.filefactory.com/file/5b6a1e/
Powder Ski.dxf of size 0.515 MB
http://www.filefactory.com/file/fda29c/
Tony