Affordable drilling template for splitboard inserts

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
24Dave
Posts: 124
Joined: Mon Oct 03, 2011 2:14 pm

Affordable drilling template for splitboard inserts

Post by 24Dave »

This 30 dollar jig from Woodhaven has 3/8" diameter holes, 1" apart that if used with a 3/8 forstner bit gets your splitboard binding inserts in the right place for an easy price. Also the threaded line up pins (on the thread side) are exactly 1 & 11/16 from the 1" hole centers for easy layout on an already cut splitboard core that needs its inserts put in.

https://woodhaven.com/collections/shelf ... lf-pin-jig
Post Reply