Fiberglass in layup
Posted: Wed Jan 18, 2023 3:13 pm
Hey, I am currently building my first snowboard for a high school project. I am stuck though as I only have 2 meters of 22oz triax glass for 1 board (162cm). I am on a time crunch and dont have time to order another 2 meters. I am curious if I could use a meter of 22 oz triax on the top and bottom in the center of the board, and add some of this 8oz for the tip and tail. https://www.homedepot.com/p/3M-Bondo-8- ... /202077814. Would this ruin the board? Could I only fiberglass one side of the board? Is there another material I could use either on the top or the bottom? Could I only fiberglass the middle of the top and bottom? Anyone who has some experience I would appreciate your advice, as I am not completely sure what the effect on the board would be.