I notice on some boards that I see, the base has little dips right along the edge over the steel teeth on the ptex base. Does anyone know what causes this and how to fix it?
Could it be too hot or too much recess in the core, too much pressure or not not enough resin around the teeth? It looks like they were pressing the 180 degree range
dips in the base along the edges
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
For a possible solution have a look at
http://www.skibuilders.com/phpBB2/viewtopic.php?t=605
http://www.skibuilders.com/phpBB2/viewtopic.php?t=605