mold and core profiler

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
thehaze
Posts: 5
Joined: Thu Oct 17, 2013 1:33 am

mold and core profiler

Post by thehaze »

Hi everyone, after many years of dreaming about building my own ride seems like the time has finally come!
With my surprise though the website and all the beautiful guides that I remember looking at are gone, I just spend 2 hours searching on the forum for description and pics about how to build molds and core profiler but I didn't got much...so if you guys have new pics to post or guides please share!
I still remember the general idea but I'd like to see some of yours to clear my ideas and decide how to build them! I'm going to use an hydraulic press with the hoses.

Thaaaanks

User avatar
chrismp
Posts: 1328
Joined: Fri Feb 13, 2009 9:00 am
Location: Vienna, Austria

Re: mold and core profiler

Post by chrismp »

You can use wayback machine to check out older versions of the website: https://web.archive.org/web/20170119062 ... iler.shtml

thehaze
Posts: 5
Joined: Thu Oct 17, 2013 1:33 am

Re: mold and core profiler

Post by thehaze »

leggend! thanks so much!

Post Reply