Top sheet alternative

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Gilo
Posts: 62
Joined: Sun Feb 03, 2013 7:36 am
Location: Somerset - the flatlands

Top sheet alternative

Post by Gilo »

Hello everyone - I am making a pair of skis for someone for Christmas and have realised that I have no clear topsheet left and can't get any in time

Does anyone have any suggestions for an alternative - I don't want to go down the veneer route.

Thanks

Gilo
Hannes
Posts: 93
Joined: Wed Nov 09, 2011 2:20 am
Location: NRW, Germany

Post by Hannes »

No topsheet, just UV-stable epoxy.
I did two skis without topsheets, made both with SuperSap. It looks pretty nice with the core shining through the glasfibre even though it is not very durable. The second one had veneer just at the tip and the tail.
mammuth
Posts: 449
Joined: Tue Oct 28, 2014 3:48 am
Location: somewhere in the alps

Post by mammuth »

Some old tip from here was to use mylar foil. You remove it after baking and it should give you a nice smooth finish.
Last edited by mammuth on Sun Dec 24, 2017 11:51 am, edited 1 time in total.
Tom
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

Last years xmas cards?
sammer wrote: I'm still a tang on top guy.
mammuth
Posts: 449
Joined: Tue Oct 28, 2014 3:48 am
Location: somewhere in the alps

Post by mammuth »

This forum needs a thumbs up function. LOL - thanks montucky :)
Tom
MadRussian
Posts: 712
Joined: Thu Sep 30, 2010 12:32 pm
Location: USA

Post by MadRussian »

how about cotton like it was done while back. So many options from your local craft store
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Post Reply