Ski Builders Forum

Well I'm sorry to see this day come, but all my ski building equipment and supplies are going for sale.

- I-Beam style ski press, heated top and bottom, built in layup table
- A couple of adjustable length molds
-Older, but complete, Montana stone grinder (needs a few hoses),
-Planer core profiler
- Enough 4001 base, edges, tip spacer, and fiberglass for 20+ pair of skis
- Some QCM epoxy
- a few ski profile jigs
- some random top sheet, maybe three pair
- extra fire hose
maybe some other random stuff, but I will have to look.


Located in Victor, Idaho at the base of the Tetons.

Here is a link to a dropbox folder with pictures. I will add anything else I find to it. Asking $5,900 obo. for everything.

https://www.dropbox.com/sh/3iy00p48onkp ... iE3Ja?dl=0

Let me know if you have any questions.

Scott

What is your press width and cavity height? Would you be willing to sell just the press? Everything works well I would assume? What pressure/temp do you press at and do you get flat bases? thanks!

Press Cavity is 100" wide to start of I Beam Spacer, 10 1/4" high

Overall Press is 10' long to the outside

All Grade 8 Bolts and tack welded, it is also on large casters and moves around well.

Everything works.

I typically would press at 180F, and 55-60 psi. I have pressed at higher pressures, but decided I didn't think it was needed.

Bases have been fine by my standards, but I haven't seen a lot of other skis straight out of the press to compare to.

I may consider selling the press separate if I have someone else that wants materials. Which someone contacted me about, so a possibility.

Let me know if you have any other questions.

Scott

I'll be interested in 4001 base material.... If you decide to sell it separately. 1.4 or 1.7? any VDS to sell?

I have been having people ask about separating items so prices are below. For now I am going to try and sell materials as a bundle still. Sorry Mad Russian, I'll let you know if that changes.

Press with heat blankets, controls, molds, templates, layup table, fire hose bags. $4,800 If you don't want the molds and templates I will do $4,500. Shipping at your cost.

Materials - Base, edges, tip sapcer, random top sheet, fiberglass $700, plus the actual cost of shipping

Stone Grinder $250

Fire hose - Let me know how much you need and make an offer. Plus the actual cost of shipping.

QCM Epoxy - If you are buying materials or press in person and want it, lets say 50% 0ff, don't remember how much off the top of my head.

Let me know if anyone has any questions.

Where are you located?

Vinman, I am in Victor, Idaho.

Vinman, just looked up your website. Great looking skis!! I went to UVM and my sister is still in Fairfax. Definitely miss Vermont some days.

Thank you, check your messages Re: grinder.

Thanks for the interest. The Materials were all sold to one buyer. Grinder might be gone, I will update when I know.

I still have the heated press and molds!! Make an offer.

I also have a 42" HP designjet 500 printer/plotter if anyone is interested. Comes with extra rolls of paper and ink. I would take $450 for it. Works great. Just don't need it anymore.

Well I decided to drop the price a bit and confirm the press size.

The interior press cavity is 100" long X 16" Wide X 10 1/4" high.

The printer sold.

How about press (with dual heat controls), grinder, molds, templates for $4000.

I would be interested in a 3hp tablesaw or maybe a 16 - 20" planner as a partial trade. Let me know what you have.

Is this still available?

Still available fro now. Check your PM's

I found a few rolls of VDS and a few hundred inserts I will throw in with everything mentioned above and I'll even drop the price to $3,900.

Winters coming, you know you want to make some skis!!

Still available. Make an offer.

Press, 2 heat blankets, molds, templates, core profiler, vds, inserts.