For discussions related to ski/snowboard construction/design methods and techniques.
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
Gilo
- Posts: 62
- Joined: Sun Feb 03, 2013 7:36 am
- Location: Somerset - the flatlands
Post
by Gilo »
As a rule of thumb do you
a. Align max core thickness and sidecut centre on the BMP
or
b. Align these two on the ball of foot point (in my case 65mm up the ski from the BMP)
There seem to be 2 schools of thought.
Just had an epic trip to Morzine - will post report next week
Gilo
-
Dtrain
- Posts: 549
- Joined: Wed May 18, 2011 12:03 pm
- Location: Prince Rupert/Terrace B.C.
Post
by Dtrain »
we center max thickness @ boot centre.
-
pmg
- Posts: 480
- Joined: Sat Dec 01, 2012 8:59 am
- Location: Sonthofen
Post
by pmg »
Same here, max. thickness = boot middle.
-
heke
- Posts: 113
- Joined: Sun Dec 06, 2015 9:44 am
- Location: Europe
Post
by heke »
Same here..samma här in Swedish
-
Akiwi
- Posts: 370
- Joined: Thu Jan 15, 2015 7:48 am
- Location: Olching (Near Munich) Germany
Post
by Akiwi »
And I assume the narrowest point of ski also at boot cente?
I am nobody. Nobody's perfect, so I must be perfect.