just a quickie
Posted: Thu Mar 10, 2016 2:50 am
As a rule of thumb do you
a. Align max core thickness and sidecut centre on the BMP
or
b. Align these two on the ball of foot point (in my case 65mm up the ski from the BMP)
There seem to be 2 schools of thought.
Just had an epic trip to Morzine - will post report next week
Gilo
a. Align max core thickness and sidecut centre on the BMP
or
b. Align these two on the ball of foot point (in my case 65mm up the ski from the BMP)
There seem to be 2 schools of thought.
Just had an epic trip to Morzine - will post report next week
Gilo