Is this an adequet bit for core profiling in the one inch size.
http://www.amanatool.com/bits-fv/41410.html
Also shown here.
http://www.toolstoday.com/p-5211-detail ... ids=5135,0
bit for profiling
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Sam,
This is the type that I use:
www.carbide.com/catalog/SearchRBDetail. ... 0201.01.04
The K's use this type also, I believe:
www.skibuilders.com/howto/equip/profiler.shtml
I got one at Lowes or Home Depot (can't remember which). Works great and not too expensive. 1 1/2 inch diameter makes profiling go much faster.
G-man
This is the type that I use:
www.carbide.com/catalog/SearchRBDetail. ... 0201.01.04
The K's use this type also, I believe:
www.skibuilders.com/howto/equip/profiler.shtml
I got one at Lowes or Home Depot (can't remember which). Works great and not too expensive. 1 1/2 inch diameter makes profiling go much faster.
G-man