Page 1 of 1
Screen Printing Spring Drying Rack
Posted: Mon Nov 16, 2015 6:43 pm
by broz
I have an extra screen printing drying rack for sale if anyone is interested. It's extra wide to accommodate ski and snowboard length laminates. $600 CAD obo, worth $4000 new. Email me at jasonmbroz(at)gmail.com for photos. It will need a van or truck with a lift gate, but it's on casters.
Jason
Posted: Mon Nov 16, 2015 9:59 pm
by Dtrain
Broz, same guy as Clyde and Endevour?
I remember seeing a pic of your presses and you where pressing upside down!
Always wondered why? Also curious about endevours urethane sidewall product, and the process of pouring them. I've done many myself, but always looking to improve! I'll ask te guy with an ispo award, safe bet!
Derek
Posted: Mon Nov 16, 2015 10:02 pm
by Dtrain
Another thing broz, you ever hear of an autofeed grinder or and other machines in the lower mainland b.c. would love a heads up!
Derek
Pressing
Posted: Tue Nov 17, 2015 9:58 pm
by broz
Pressing upside down was an experimental way of keeping resin off the bases. When you press the normal way resin pools at the hips of the ski/board. There's a major flaw with the upside down method and its that the resin will pour down the tips and can get on your airbags.
Jason
Posted: Wed Nov 18, 2015 12:50 am
by chrismp
@broz: Big fan of your new binding company!
As for the upside down pressing, maybe a trough at the ends of the molds could catch excess resin or lead it away from the hoses and into a container. If you make it out of teflon or PE it should be easy to clean or switch out if any resin remains in there.