Through the thorns to the stars

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

Going to test a few board on "sunny days"...
ImageImageImage
ImageImageImage
Rocker (flat beneath feet), stiff, park board.

ImageImageImage
ImageImageImage
Rocker (flat beneeth feet), medium stiff, all mountain.
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

You guys have come a long way in the last few months.. the results look very good. I like the graphics too.
Well done..

Now let's start working on your photography skills
;)
I am nobody. Nobody's perfect, so I must be perfect.
motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

have just one lamp in my hostel and action cam with no flash, so the quality is definitely is going to be better))
motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

Have anybody tested their skies or snowboards on destruction under the pressure?
It is interesting how many kilos one ski or one snowboard could take?
Using acquaintances in the Research University we did a few experiments to test theoretical and practical calculations.
Image
Image
motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

Reinforcement in our rows. Summer does not pass in vain
Image
motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

This spring we did an experiment to check the speed of growth of paulownia tree. It was said that rate of growth will be from 1 to 1.5 miters per season!
The result is not so impressive, but still good)
Now we are waiting for mature trees) We were told that in 5 years there will be able to cut them to use.
Image
Image
Image
motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

Here are some of our veneer topsheet boards.
They are not still varnished and a bit dirt.
Image
User avatar
Akiwi
Posts: 370
Joined: Thu Jan 15, 2015 7:48 am
Location: Olching (Near Munich) Germany

Post by Akiwi »

Realy realy nice looking boards guys!
Congratulations..
I assume you have to drill the binding holes too.
I am nobody. Nobody's perfect, so I must be perfect.
motoman
Posts: 243
Joined: Thu Jan 15, 2015 5:52 am
Location: Ukraine

Post by motoman »

Akiwi wrote: I assume you have to drill the binding holes too.
Thanks. Yeap, those boards are just cut off. I will add a few pics after lacuering with back sides as well.
Post Reply