Bladder diameter dilema

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

User avatar
dbabicwa
Posts: 133
Joined: Tue Aug 28, 2012 5:16 pm
Location: Perth, Australia
Contact:

Post by dbabicwa »

From my experience forget sending something to Argentina from the US.

Or almost any other Western country except maybe Spain...But Agustin might confirm better.
PIPO
Posts: 18
Joined: Thu Aug 21, 2014 6:46 am
Location: Ushuaia - Argentina

Post by PIPO »

gav wa wrote:That'll work. I've even used the blue one before and had no problems.
Having troubles with yellow hose supplier :x

So you said you've used the blue one and had no problems... can you tell me how did you make the valve connection?
PIPO
Posts: 18
Joined: Thu Aug 21, 2014 6:46 am
Location: Ushuaia - Argentina

Post by PIPO »

dbabicwa wrote:From my experience forget sending something to Argentina from the US.

Or almost any other Western country except maybe Spain...But Agustin might confirm better.
You're right man... sending stuff here is a PITA. :?
PIPO
Posts: 18
Joined: Thu Aug 21, 2014 6:46 am
Location: Ushuaia - Argentina

Finally got it!

Post by PIPO »

Well guys... I can proudly tell you that I finally got the hose! 8)

6'' Lay-flat polyester reinforced urethane hose, 9 1/2'' laying flat. Can handle up to 200psi. So happy with it! :D

Image

It was quite expensive, like $50/mt. but totally worth it.

Thanks again for your help guys. :D
Post Reply