hi everyone
does exist a cnc edge bender?
cnc edge bender
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact:
-
- Posts: 2204
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
You're not going to find a commercial off-the-shelf CNC edge bender. This is a DIY project, and there are lots of reasons its not easy. If you are a large ski company producing many sets of the same edge, the investment makes sense - even then you either have to build your own machine, or contract with someone to build you a custom. There is no market for a commercial CNC ski edge bender.
If you are a home-builder? It makes zero sense. Get yourself a set of tile nippers and modify them (you'll find pictures on the forum if you do some searching). It's a few dollars, and you get as good of results as you would with a CNC, it just takes a long time.
If you are a home-builder? It makes zero sense. Get yourself a set of tile nippers and modify them (you'll find pictures on the forum if you do some searching). It's a few dollars, and you get as good of results as you would with a CNC, it just takes a long time.