For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
gozaimaas
Posts: 663 Joined: Fri Feb 10, 2012 4:17 am
Location: Nagano Japan
Post
by gozaimaas » Wed Nov 13, 2013 6:54 pm
bhenry wrote: gozaimaas wrote: Wont you want 2 so they can operate independently?
Yes, makes sense. Electrical is above my pay grade.
Really nice boards.
I like the satin finish. What's your technique?
Cheers mate
My finish technique is spar polyurethane sanded back with green scotchbrite
troublemaker
Posts: 217 Joined: Sun Jan 22, 2012 10:03 pm
Location: The Dalles Oregon
Post
by troublemaker » Mon Nov 18, 2013 7:25 am
No, run two SSR's and heat sinks be sure to use the paste heat transfer stuff between the SSR and heatsink. Your SSR's are the weak link in any controller system.
bhenry
Posts: 61 Joined: Thu Mar 01, 2012 8:49 pm
Location: Indianola, WA
Post
by bhenry » Thu Nov 21, 2013 6:22 pm
Thanks, just received two pids and two ssrs from auber.
Now, just need to put it all together.
bhenry
Posts: 61 Joined: Thu Mar 01, 2012 8:49 pm
Location: Indianola, WA
Post
by bhenry » Thu Nov 21, 2013 6:24 pm
PS, I noticed there are external heat sinks. Is that a good way to go?