FS: Ski Press in Salt Lake City
Posted: Sun Aug 25, 2013 11:55 am
I haven’t used the press since 2010 when I graduated from college - and it pains me to see it sit idle.
Its located in Salt Lake City, UT.
It has an impressive pedigree, with numerous powder boards and beefcake carving machines under its belt.
Built out of 4x4 inch steel box beams
Not interested in trying to ship it anywhere (it’d likely be prohibitively expensive due to its weight).
Sized to allow for skis as long as 235cm or as wide as 200mm.
The cassette slides in from the end.
I'll throw in a set of adjustable camber forms if you're interested in them.
It has had additional center bands added to it since this picture.
Reply or PM for additional info.
$200 OBO, The materials alone are easily worth that much.
Its located in Salt Lake City, UT.
It has an impressive pedigree, with numerous powder boards and beefcake carving machines under its belt.
Built out of 4x4 inch steel box beams
Not interested in trying to ship it anywhere (it’d likely be prohibitively expensive due to its weight).
Sized to allow for skis as long as 235cm or as wide as 200mm.
The cassette slides in from the end.
I'll throw in a set of adjustable camber forms if you're interested in them.
It has had additional center bands added to it since this picture.
Reply or PM for additional info.
$200 OBO, The materials alone are easily worth that much.