just wondering if anyone has played around with this new TPU material from crown.
http://www.crownplastics.com/catalog/pr ... cts_id=476
thanks
any try Crowns new Duravision top sheet
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact:
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
I think your confused.
THis is a tpu, its almost exactly like the socrep tpu but twice as thick which is a huge improvement and for the cost jts good stuff but the nylon is still clearer and tougher, I pressed a sample side by side.
For the best quality its the nylon if you are doing production runs or demos the crown tpu is a nice alternative.
THis is a tpu, its almost exactly like the socrep tpu but twice as thick which is a huge improvement and for the cost jts good stuff but the nylon is still clearer and tougher, I pressed a sample side by side.
For the best quality its the nylon if you are doing production runs or demos the crown tpu is a nice alternative.
sammer wrote: I'm still a tang on top guy.
-
- Posts: 26
- Joined: Fri Aug 10, 2012 9:25 pm
Hey whats the scoop on that socrep? i have a friend that was using it last week but i didn't go too far into it with him. when i looked further into it it seems like it can be tougher and have a nicer finish, but that the coating on it would actually wear with time. i got the impression if it was something where you were buying in bulk and didn't use it for a long time you might lose some of the benefits of it.
i'm going to order the duravision with my next order and i figured it would be like the iso sport top sheets. since i'm going for the super light factor though maybe i outta try out the socrep?
(and by the way montucky, thanks for the advice last week, you were dead on about the crimping in my composites. problem solved!)
i'm going to order the duravision with my next order and i figured it would be like the iso sport top sheets. since i'm going for the super light factor though maybe i outta try out the socrep?
(and by the way montucky, thanks for the advice last week, you were dead on about the crimping in my composites. problem solved!)