Page 1 of 6
Great news, snocad related!!!!!
Posted: Thu Apr 11, 2013 3:00 pm
by vinman
I messaged Dan Graf yesterday to ask about hosting Snocad on another website. I just heard from him, he said he would upload snocad to another website if we could let him know where. Turns out all we had to do was ask....huh, go figure.
I've contacted Kam about putting it up on ski builders main web site. I figured that would be the most appropriate place to host it since we all have gotten our start here.
I'll post here when I hear back from Kam.
Posted: Thu Apr 11, 2013 7:07 pm
by Dtrain
It's all coming together. Good thinking
Posted: Thu Apr 11, 2013 11:30 pm
by vinman
I've been in contact with Kam, things look good, stay tuned!!!
Posted: Fri Apr 12, 2013 1:14 am
by tufty
Excellent news. Truly excellent.
Posted: Fri Apr 12, 2013 3:33 am
by chrismp
although i've switched to rhino a while ago, this is great news!
Posted: Fri Apr 12, 2013 4:15 am
by vinman
I'm juggling time zones right now communicating between Europe, the east coast of the US and western US. Waiting for it to be a decent hour in Nevada before calling Kam.
Posted: Fri Apr 12, 2013 7:08 am
by vinman
Just talked to Kam, the wheels are in motion.
Posted: Thu Apr 18, 2013 3:30 am
by Y
any news ?
I guess my addiction is getting badly serious !
also, big thanks !
Posted: Thu Apr 18, 2013 8:55 am
by vinman
We've been in touch with Dan, just waiting for him to get back to us. I'll post whenever I have info to share.
Posted: Thu Apr 18, 2013 9:55 am
by tufty
<f5> <f5> <f5> is it there yet? <f5> <f5> <f5> etc etc
Posted: Fri Apr 19, 2013 11:48 am
by gketcham
Is there any other program that is even close to being as easy as SnoCad?
Posted: Thu May 02, 2013 6:13 pm
by ProbsMagobs
any progress? Snocad is officially broken for me which sucks because I found out I can do my cncing at school but only have until summer before we get let out. Got about 4 shapes stuck as snocad files right now
Posted: Thu May 02, 2013 6:34 pm
by vinman
unfortunately I've not heard anything back from Dan in quite some time now after a few emails. Doesn't look good.
Posted: Fri May 03, 2013 5:30 am
by Y
I guess we'll have to learn how to use a real cad then ...
is there any way to "read" snocad files ? I just need to read somes measures, for a board, and I don't want to "rethink" everything
thanks anyway
Posted: Fri May 03, 2013 10:25 am
by sammer
Y wrote:I guess we'll have to learn how to use a real cad then ...
is there any way to "read" snocad files ? I just need to read somes measures, for a board, and I don't want to "rethink" everything
thanks anyway
Nope...
Unless you saved a design spec pdf. That will give you a small drawing of the ski, core and all relevant dimensions.
All your drawings were on Dans computer and you just have a link to them.
sam