Full ready to use pneumatic + heated ski press for sale!
Posted: Mon Jun 04, 2012 7:47 pm
Posted this back in December, but no takers. Don't know quite why, because everything on this press immaculate and affordable considering the labor and time and materials! Refer to this thread for full details. My new asking price is 3,500 and you are responsible for shipping or pick-up.
Full size press. Check out the video, it does a decent job explaining. Check out some pictures of products at artificialskicompany.com.
Specifics:
-82" length - the video mistakenly states 84"
-20" Deep
-12" maximum height, 11" minimum height (difference comes from the I-beam welded to square tubing. eg, height between square tubing is 12" and inside of i beams is 11")
-MEI heat blanket which fills the entire length and width of the press.
-HEAVY. Not stated in the video, but the wheel is present because the entrance to the 10' x 16' shop is narrow and had to come in width-wise.
- Make an offer.
Please email at artificial.skis@hotmail.com for the quickest reply.
Full size press. Check out the video, it does a decent job explaining. Check out some pictures of products at artificialskicompany.com.
Specifics:
-82" length - the video mistakenly states 84"
-20" Deep
-12" maximum height, 11" minimum height (difference comes from the I-beam welded to square tubing. eg, height between square tubing is 12" and inside of i beams is 11")
-MEI heat blanket which fills the entire length and width of the press.
-HEAVY. Not stated in the video, but the wheel is present because the entrance to the 10' x 16' shop is narrow and had to come in width-wise.
- Make an offer.
Please email at artificial.skis@hotmail.com for the quickest reply.
